Hand Stoke Belt Sander MM 2215
Specification:
Table Size:2440×1220 mm
Sanding Speed:15 (m/sec.)
Belt Size:152 x 7000 mm
Roller Speed:1420 r/min
Installed Power:5 HP
Overall Size (LxWxH):4200年x700x1400mm
Net Weight:565 Kg.
CNC Spindle Rotary Peeling Heavy Duty KI-SPRL-1350
Technical Specification :
Having capacity to peel log of length:1400 mm
Having capacity to take10’ girth.
Compressor:2 HP
Power Pack:3惠普
Machine will be with knife & electric motors:40 HP
Main Drive:3惠普x 1 for the movement of the Spindles:3惠普for the movement of the carriage
Knife Grinder MF 3000
Technical Specification :
Max. Working length :1500 mm
Workbench width :200 mm
Work bench tilting angle:±90°
Grinding motor power :5.5 HP
Linear speed :15 m/min
Sliding speed :variable speed
Dimension :5300*1400*1400 mm
Automatic DD Saw ST 48-3 NC Type
Technical Specification :
Procession Length Arrange: 1830-2500 mm
Processing With arrange: 915-1300 mm
Cutting Thickness: 10-60 mm
Feeding Speed-Longitudinal Saw: 30-60 m/min
Feeding Speed-Horizontal Saw: 30-60 m/min
Total Motor Power: 50 HP
Daylight Hydraulic Press
Technical Parameter of Hot Press Platen :
Max. Production Size:2600 mm x 8000 mm x 150 mm
Surface Finish:= /
Parallelism Tolerance:0.10 mm
HYD. Leak Test Pressure := /<25 kg/CM2
Technical Specification :
Technical Specification Capacity of Press:640 TON – 12 Daylight
Window Frame:(1)Over All Dimension of Press 3280 X 3900 X 1350 MM
(2) No. of Window 4 Nos. – 2 Pair
(3) Window Platen – 32 MM
(4) Window Material IS2062 GRADE B
SPECIFIC PRESSURE:20 K.G/C.M2 ON 122 X 244 C.M BOARD AREA
Heating Platen:(1)Over All Dimension 1350 X 2600 X 45/44 MM
(2) No. of Platen 13 NOS.
(3) Platen Material IS2062 Grade B Chemical Compo.：C≤0.20，Mn ≤1.70， Si≤0.50，P≤0.035，S≤0.035 Nb≤0.07，V≤0.15，Ti≤0.20，Cr≤0.30，N≤0.012， Mo≤0.10 Mechanical property – tensile strength：490-675; yield strength：≥345, elongation：≥21
(4) Drilling Method: BTA /GUN Drilling
(5) Drilling Length : 8 Feet Long Drilling
(6) No. of Holes & Diameter: 14 NOS. & 22 MM
(7) Circuit Formation: 2 Inlet & 2 Outlet
(8) Platen Finish: Grinding Finish on Both Side
(9) Platen Cleaning: ¾’’ threaded M.S Hyd. Plug
Gap Between Two Platens:80 MM
Cylinder Ram Unit:(1) No. of Unit: 8 Nos. (Window Resting)
(2) Piston Diameter: 200 MM
(3)Piston Stroke: 960 MM (80 x12 FULL STROKE)
(4)Hardchrome & Ground With Mirror Finish Seal: Multi Seal Chevron Packing Gland Guide: Wiper Seal
Working Pressure:254.77其它/ C.M2
Loading Side:2600 MM
Heating Medium:Steam/Thermic Fluid Oil
Press Closing Time:19 Seconds (Empty Press Closing Time)
Top Bolster:2600 X 1350 X 120 MM
Bottom Bolster:1350 X 2600 X 300 MM (EXTRA HEAVY)
Connection Load:(7.5 + 7.5 + 15 = 30 H.P)
Hydraulic Power Pack:800 Ltr. Tank – Rubber Paint Coated Low Pressure Pump –Vane Pump High Pressure Pump – Vane Pump ELE. Motor – ABB Make D.C VALVES – BOSCH Rexroth Make Other Component Standard Rexroth/Polyhydron Make
ELE. Control Panel:Fully Automatic Control Panel With Manual Option
Inlet & Outlet Main Header:4’’ ‘C’ Class M.S Pipe
S.S Flexible PIPE:1’’ S.S- 304 Corrugated Breaded Hose Pipe
Glue Mixer
Specification:
Glue Mixer :150 LTR
Motor Power:4 HP
Glue Spreader (Double Sides)
Specification:
Max. Processing width :1350 mm
Max. Processing thickness :60 mm
Rubber roller dia :ø190 mm
Doctor roller dia :ø164 mm stainless one
Spreading speed :20 m/min
Motor power :2 hp
Dimension :2000*900*1400 mm
Weight :640 kgs
Veneer Dryer 6 Section 3 Decks
Specification:
Jet Ventilated Automatic Roller Track Dryer :4600 mm in working width
Length of the heating section:12000 mm
Height:3200 mm
6 Nos. Compact Drying Chambers with 3 Decks
1000 mm cooling section having 2 nos. fans and 2 nos. motors, 1900 mm long single roller feeding arrangement for each deck.
Variable drive (Frequency Drive), Gear Box Chain Tension Devices, Cast Iron Bushes, Pinions, Sprockets and 1” Pitch Drive Roller Chain.
The Dryer will be complete with 9 Nos. Electric
Motors and one Electrical Control Panel, Temperature Meter.
Hydraulic Veneer Guillotine (MQJ 260)
Specification:
Max. Cutting Length :2600 mm
Max. Cutting Thickness :50 mm
Hydraulic Pump Motor :4 kW
Motor Power :0.1 kW
Working Pressure :10 Mpa
Dimension :3680x1680x1600 mm
Weight :27010 KGS
Paddle Chopper Machine
PADDLE CHOPPER MACHINE(Complete with Knife)
Spindleless Rotary Peeling Machine With Clipper 1300-BDW / FL
Specification:
Max. cutting length :1400 mm
Max. cutting diameter :450 mm
Log-core diameter:24 mm
Cutting thickness:0.35 – 4 mm
Outfeed Speed:65 m/min
Feed Motor :15 HP
Roller Drive Motor (Double Roller):15 HP
Roller Drive Motor (Single Roller :Pressure Bar):10HP x 2 nos.
Clipper Motor:2 HP
Out-feed Conveyor Motor:2 HP